Hotline
+8615161118388
The working principle of vacuum rake dryer:
The dried material is added from the middle of the shell, and under the stirring of the continuously rotating rake teeth, the material moves back and forth axially. The surface in contact with the inner wall of the shell is constantly updated, and is indirectly heated by steam. The uniform stirring of the rake teeth and the crushing of the crushing rod vaporize the water inside the material. Under the action of the vacuum system, the internal and surface water of the dried material are more effectively discharged, and the vaporized water is passed through the dry dust collector Wet dust collector and condenser, vent from the outlet of the vacuum pump.
Characteristics of vacuum rake dryer:
1. Uniform drying of materials; Avoid oxidation and overheating; Products with extremely low moisture content can be obtained and packaged without the need for crushing operations.
2. High evaporation intensity, generally capable of evaporating 10-15kg (water)/m ²· h。
3. Without air intervention, the condenser has a low load and can facilitate the recovery of material solvents.
4. After the solvent vapor entrainment is filtered through a bag filter, there is no environmental pollution.
5. Energy consumption: Generally, evaporating 1kg of water requires 1.3-1.5kg of water vapor.
6. The discharge valve is a ball valve inside the cylinder, which is convenient for unloading.
7. The hot medium can be steam, hot oil, or hot water.
The application range of vacuum rake dryer:
Mud like, high paste like, materials below 100 mesh, various pigments, mud head like materials, filter cakes, centrifuge filter cakes, pure alkali detergent, alkali stone starch, dyes, pigments, clay ash, clay, cement, etc.